Electric Vacuum Pump Switch
12 volt. in-line vacuum switch which energises the pump, via a relay when vacuum is required.
Inlet and outlet hosetails are 12mm diameter.
Single connector in the plug.
Plug terminal included
Switch body must be earthed.
Download instructions below
ELECTRIC VACUUM PUMP SWITCH #VACSW
IMPORTANT NOTE: FOR THIS SWITCH TO WORK CORRECTLY IT IS IMPERATIVE THAT THERE ARE NO VACUUM LEAKS.
USE GOOD QUALITY FUEL HOSE CLIPS ON EVERY HOSE JOINT AND CHECK OPERATION OF THE RELAY AND SWITCH BY PUTTING YOUR FINGER OVER THE END OF THE HOSE JOINING THE SERVO BEFORE FINALLY CONNECTING IT. WAIT FOR THE PUMP TO STOP. THE LONGER IT TAKES TO START AGAIN, THE BETTER YOUR SYSTEM IS SEALED.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
12 volt. in-line vacuum switch which energises the pump, via a relay when vacuum is required.
Inlet and outlet hosetails are 12mm diameter.
Single connector in the plug.
Plug terminal included
Switch body must be earthed.
Download instructions below
ELECTRIC VACUUM PUMP SWITCH #VACSW
IMPORTANT NOTE: FOR THIS SWITCH TO WORK CORRECTLY IT IS IMPERATIVE THAT THERE ARE NO VACUUM LEAKS.
USE GOOD QUALITY FUEL HOSE CLIPS ON EVERY HOSE JOINT AND CHECK OPERATION OF THE RELAY AND SWITCH BY PUTTING YOUR FINGER OVER THE END OF THE HOSE JOINING THE SERVO BEFORE FINALLY CONNECTING IT. WAIT FOR THE PUMP TO STOP. THE LONGER IT TAKES TO START AGAIN, THE BETTER YOUR SYSTEM IS SEALED.
